AG-MEIER Box Blades

Heavy Duty Box Blades
Ag-Meier's Heavy Duty Box Blade is built to withstand severe conditions. The 3/8'' thick back plate and the 1/2'' thick end plates are 200'' high and will carry large amounts of soil in each pass. The shank bars are 4'' deep to help reinforce the scarifier shanks when digging in hard soils. The weight of the box blade also helps to increase traction and stability to tractors with front end loaders. Category ii 3-Point Hitch.

Models:
BH006 -6' wide, 60-2WD hp rated, 6 shanks
BB007 -7' wide, 60-2WD hp rated, 7 shanks
BB008 -8' wide, 60-2WD hp rated, 8 shanks

Standard Duty Box Blades
Ag-Meier's Standard Duty Box Blade is constructed with 1/4'' thick steel on the end plates and back plate and is 16'' high. The Standard Duty Box Blade will handle most-commercial jobs. Category I 3-Point Hitch.

Models:
BB004 -4' wide, 30-2WD hp rated, 4 shanks
BB005 -5' wide, 30-2WD hp rated, 5 shanks
BB006 -6' wide, 30-2WD hp rated, 6 shanks

Compact Box Blades
Ag-Meier's Compact Box Blade is built for compact tractors. The end plates and back plate are made of 3/16'' steel and are 14'' high.  It has Category I 3-Point Hitch Pins on Category O Spacing..

Models:
BB035 -3.5' wide, 20-2WD hp rated, 3 shanks

Continental Belton Home and Turf Sprayers

SPS SUBURBAN
Portable sprayer with 16x16.5 tires, 30 gallon fiberglass tank, tractor hitch and pull handle with stand and pump powered by gasoline engine.

Options:
- Aluminum or Brass Spray Wands with Pistol Grip Spray Guns
- Folding Mounted Boom with 9-1/2 ft Swath Coverage
- Quaility Brass Gear Pump or Economy Roller Pump

LG Sprayer
15 or 25 gallon skid units with 12 volt diaphram pump 35 PSI 1 GPM and 15 ft. hose with spray gun.

Options:
- 60 PSI, 1.5 GPM Pump (Diesel may be used)
- Frame with 16'' Spoke Wheels, Tongue Assembly for Garden Tractor Attachment and a Handle for Pulling
- 3 ft. Mounted Boom Assembly

TC60-AT Sprayer
Assembly includes 16x6.5 turf tires and wheels with all terrain axle and bearing, tongue jack stand and saddles for a 24'' diameter tank.

TC60-AT Sprayer
Assembly includes 16x6.5 turf tires and wheels with all terrain axle and bearing, tongue jack stand and saddles for a 24'' diameter tank.

Options:
- 55 Gallon Polyethylene Tank or 60 Gallon Fiberglass Tank
- Braodcast Spray Attachment for 30 ft. Wide Coverage
- Folding Mounted Booms for 14.5 ft. Swath Coverage
- Aluminum or Brass Spray Wands with Pistol Grip Spray Guns
- Quaility Brass Gear Pump or Economy Roller Pump ( with Pressures up to 250 PSI and Volumes Up To 12 GPM) PTO or Engine Driven

Skid Multi-Purpose Engine Driven Spayer
Skid mountint assembly includes mounting frame with saddles for 55 to 220 gallon fiberglass or polyethylene tanks.

Big Skid Multi-Purpose Engine Driven Spayer
Big Skid assembly includes frame with saddles for 200 to 525 gallon fiberglass or polyethylene tanks.

Options:
- 40 ft. Broadcast Spray Attachment
- 14.5 ft. to 33 ft. Folding Mounted Booms
- Electronic Controls for Booms and Broadcast Attachments
- Foam Markers
- Aluminum or Brass Spray Wands with Pistol Grip Spray Guns
- Hose Reel for Spray Gun and Hose Assembly
- 4 or 8 Cylinder Piston Pumps (with pressures up to 500 PSI and volumes up to 22 GPM)
- Brass or Cast Iron Gear Pumps (with pressures up to 250 PSI and volumes up to 48 GPM)
- Electric Start Kit Available on Select Models