CTI 4-in-1 Bucket Forks

Recognizing that "4-in-1" buckets have the unique ability to grab and hold many things, including attachments, CTI has designed a revolutionary type of fork that takes advantage of that feature - its new 4-in-1 Bucket Forks.

The features of these new forks, on which a patent is pending, include:
- No welding, no screws, no holes in the bucket. The closed clam holds the forks firmly in place.
- Rigid mounts - the forks don't swing or shift sideways.
- Easy to operate - the forks are level when the cutting edge is level.
- Easy on, easy off - No lifting, just pick them up and set them down with the machine.
- Towers that are 37 inches tall to keep loads in place and allow the operator to see the forks from the cab.
- Round grab bars on the towers to make it easy to move the forks on the ground or on and off a truck.
- Safety chains to ensure the forks will stay in place even if the bucket is accidentally opened.
- Attaches to the most reinforced part of the bucket - the cutting edges.

RAIL-MOUNTED SKID STEER FORKS - SERIES 330 & 345
Both the 330 and 345 rail-mounted series feature standard rail-mounted fork tines with latches. Designed to lift palletized loads and similar materials, the Model 330 has a lift capacity of 3,000 lbs. per set, while the Model 345, which has been designed for the new, larger skid steers, has a lift capacity of 5,000 lbs. per set. The tines are high quality forged steel and both series are available in 42" and 48" tine lengths. Forks and frames for both models have a built-in rated lift capacity safety factor of 3-to-1 and the frames feature the unique CTI coupler.
 

ROD-MOUNTED SKID STEER FORKS - SERIES 530 AND 545
The 530 and 545 series of rod-mounted skid steer forks handle palletized loads and similar materials requiring lift capacities of up to 3,000 pounds (530) and 5,000 pounds (545). They are fully adjustable across the rod and utilize set-screws. The tines do not swing because of the forged hooks at each base!

The 530 high-quality skid steer tines are custom-forged steel with 1 1/4 " cross sections, and come in 42" and 48" lengths. The 545 custom-forged tines have a 1 l/2" cross section and come in 42" and 48" lengths. Fully adjustable across the rod and with set-screws, both series are taller than standard forks, which makes the initial lift easier. The frames feature CTI's unique coupler. Both the fork tines and frame of each model have a built-in lift-capacity safety factor of 3-to-1.
 

ROCK AND MASONRY SKID STEER FORKS - SERIES 560
The 560 series of rod-mounted skid steer forks have been specially designed for extreme applications on the biggest machines, like moving boulders and block. That's why we call them "Rock and Masonry Forks." The Model 560 has a 6000 lb. lift capacity. The forks feature the new super duty reinforced frame design and a built-in lift-capacity safety factor of 3-to-1.

Model 560s feature custom-forged 1 ¾" tines. The models have bigger 1 ¾" rods and come in 42" and 48" tine lengths. The models are fully adjustable across the rod and utilize set-screws. With tines taller than standard forks, these forks sit flat on the ground, and the initial lift is easier. The tines do not swing because of forged hooks at each base. Side steps are standard on all 560 units. These forks have been subjected to rigorous field testing and usage by contractors working in the toughest conditions, with excellent results. When you need gorilla forks, these forks can do the job!